Three elements of choosing a cooling tower

　　Three basic elements of cooling tower selection:0hFCooling tower noise reduction treatment manufacturer

　　1. Determine the flow rate: The simple method is to choose according to the actual flow rate and pressure of the circulating water pump on site; or according to the amount of cooling water required by the equipment.0hFCooling tower noise reduction treatment manufacturer

　　2. Determine temperature: Determine the outlet temperature and inlet temperature of the equipment according to the cooling water demand of the equipment, that is, the inlet and outlet temperature of the cooling tower; it will become cold due to temperature.0hFCooling tower noise reduction treatment manufacturer

　　But cooling towers can be divided into three types: standard cooling towers, medium-temperature cooling towers and high-temperature cooling towers. The standard model has a temperature difference of 5, the medium temperature model has a temperature difference of 10, and the high temperature model has a temperature difference of 10 or more.0hFCooling tower noise reduction treatment manufacturer

　　3. Determine the installation environment of the cooling tower: select the type according to the environmental location of the cooling tower installation. The general medium and high temperature cooling tower are directly installed on the circulating water tank, and the non-water cooling tower is selected.0hFCooling tower noise reduction treatment manufacturer

　　Cooling tower plates can be; standard cooling towers are generally installed on the roof or flat ground of the machine room. Depending on the installation location, low noise or ultra-low noise cooling towers can be selected.0hFCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/545.html