FAQ

Installation location selection of closed cooling tower

Author：Trlon Views: Time:2021-05-24

　　With the national strong advocate of ecological environmental protection, many industries have gradually begun to choose the cooling tower, but it may also be not very familiar with the cooling tower, but it is not clear what position the cooling tower needs to be installed and used in. So today, Trlon Energy Saving Air Conditioning Equipment Co., Ltd., based on many years of experience, tells you where closed cooling towers need to be installed and used.

　　I. Recommended installation and use of the specific location of the closed cooling tower:

　　(1) the installation and use of closed cooling tower need to avoid living in the centralized location, if it is installed and used in the community, need to choose the roof, the roof is wide, not only natural ventilation is smooth, but also can deal with the noise problem, the sound is not easy to reflect, the degree of noise is easy to manipulate;

　　(2) the parallel selection of several closed cooling towers needs to be connected with the balance pipe of the cooling tower in the middle of the cooling tower reservoir, so that the water in the reservoir will flow with each other in the case of the balance pipe, so that the water in the reservoir will be uniform and sustainable;

　　(3) The installation and use of the electrical control box shall be installed and used in the specific position that is easy to operate and operate, and can operate the closed cooling tower in the shortest time in the case of difficulties.

　　(4), the location of the cooling tower installation use, whether for closed cooling tower or open type cooling tower, location must choose environment more open, natural and ventilated good place, although our mechanical natural draft cooling tower is selected, with forced air flow, but the broad environment conducive to the heat diffusion, as working temperature will decline;

　　(5), the height of the installation and use and is not the higher the better, can be moderately, location and the higher the need of the pump pressure will be greater, it need high power motor pump, then to a certain extent, will lead to the cooling tower of power consumption will be expanded, and enhances the equipment manufacture cost, and cooling tower used to horizontally placed, if there is a tilt, It will affect the uniformity of the spray cloth water and the water storage of the reservoir;

　　Second, cooling tower installation height is not qualified, intelligent pump pressure can be standard, water flow, according to the installation of the 5 meters using height is able to completely, one with high walls, is just the wall and the location of the cooling tower has a certain distance, that affect the is not big, cooling tower into the wind will be affected, And the hot air is likely to be sucked into the cooling tower again, so the cooling efficiency will decline.

　　Trlon Energy Saving Air Conditioning Equipment Co., Ltd. is a professional manufacturer of cooling towers, producing and managing closed cooling towers, closed cooling towers, cross-flow cooling towers, silent cooling towers, square cooling towers, etc., and providing business services such as maintenance and energy saving renovation of cooling towers of Xinling, Polun and other brands, and replacement of accessories and fillers. Cooling tower affordable, complete models, welcome to inquire.

Article Address：https://www.trlen.com/baike/426.html

Previous：Reasons and solutions for closed cooling tower water pump not feeding Next：How to avoid leakage of closed cooling tower