The hazards of cooling tower water

　　The floating water of the cooling tower mainly includes the floating water at the air outlet and the floating water at the air inlet. The floating water phenomenon has a great impact on the safety of the cooling tower operation and the safety of the surrounding equipment environment, and the main hazards of the cooling tower floating water phenomenon Performance:w6GCooling tower noise reduction treatment manufacturer

　　1. Drifting water at the air duct-Drifting water at the air duct is a place where the cooling tower has serious water drift, which mainly has a great impact on the corrosion of the surrounding environment, especially in winter, due to the large amount of floating water in the cooling tower. Large-area icing directly affects the normal operation of the cooling tower and the equipment and environment around the cooling tower.w6GCooling tower noise reduction treatment manufacturer

　　2. Floating water at the air inlet-water floating at the air inlet is generally caused by excessive water pressure in the cooling tower, or water splashing outwards caused by excessive water flow; due to the low temperature in winter, the air inlet is prone to icing. The position of the blinds in the wind is easy to be damaged by ice hangers.w6GCooling tower noise reduction treatment manufacturer

　　3. Severe water floating in the cooling tower will lead to the loss of circulating water, and a large amount of water is required to meet the normal operation of the cooling tower. The floating water phenomenon of FRP cooling tower not only damages the surrounding environment, but also directly increases the economic expenditure of users.w6GCooling tower noise reduction treatment manufacturer

　　4. Solution: Drifting at the air duct can improve the sprinkler system, add water baffles and water collectors and other water collection measures, add a water collection plate at the air inlet, add the above points, and the cooling tower will get water floating. Great improvement.w6GCooling tower noise reduction treatment manufacturer

　　In addition, the cooling tower inlet pressure is too large or the flow is too large, it will also cause the phenomenon of water floating in the cooling tower, it is recommended that the cooling tower flow is matched with the circulating water pump according to the cooling tower model requirements, and the cooling tower circulating water pump is recommended to use large flow and low head.w6GCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/377.html