Reasons and solutions for closed cooling towers always being filled with water

　　The closed cooling tower does not yet have an external reservoir, but a reservoir is designed at the bottom of the glass fiber reinforced plastic cooling tower, and there are automatic water replenishment equipment. The closed cooling tower water supply equipment is a complete self-control system, only for water pipes or other water supply equipment. But if there is a direct water supplement, it will be abnormal. What is the reason for the direct water supplement?THwCooling tower noise reduction treatment manufacturer

　　Closed cooling tower direct water supply, you must go to check all cooling towers or pipelines for leakage areas, only leakage will lead to a small amount of circulation system, and a lot of water supply!THwCooling tower noise reduction treatment manufacturer

　　The water supply of closed cooling towers is usually controlled by floating ball valves. Water is a kind of liquid and has a fixed buoyancy. In simple terms, floating ball valves are floating ball valves. The segment of the float valve is connected to the water supply dodge. The segment is a ball. The ball of the float valve floats on the water surface and fluctuates with the change of the water surface.THwCooling tower noise reduction treatment manufacturer

　　If the water surface is high, the float valve will be high, and the water quality will be low, and the float valve will tightly cater to the water surface. When the self-spraying is reduced, the water surface will be lowered, and the float valve will open the water replenishment interface when the other one is lowered. The cooling circulating water will automatically replenish water. When the water output increases and the water surface rises, the float valve will When the water level rises to a certain level, the water supply branch pipe will be automatically closed. This is the result of automatic water replenishment. The important control equipment is the float valve.THwCooling tower noise reduction treatment manufacturer

　　The benefits of using float valves in cooling towers:

　　1. Relevant staff who do not need to be equipped with a door make water replenishment for the glass fiber reinforced plastic cooling tower. It is important to connect the water replenishment pipe, and the water replenishment can be performed automatically;THwCooling tower noise reduction treatment manufacturer

　　2. Even if the float valve is close to the water surface and the water surface is reduced, the float valve will replenish the reservoir at time to avoid insufficient water output;THwCooling tower noise reduction treatment manufacturer

　　3. Use it well for the first time. In the case of the FRP cooling tower being used for the first time, the cooling circulating water has not yet circulated the system to self-spray, or has not yet returned to the reservoir, so the water output of the reservoir has not been replenished. It will cause less water, use the float valve to control the water replenishment, the water circulation system can be carried out, and the water replenishment increases the rate;THwCooling tower noise reduction treatment manufacturer

　　4. The floating ball valve has not yet designed the electronic system, it is not so easy to damage, reflective connection, no maintenance and replacement in the middle and late stages.THwCooling tower noise reduction treatment manufacturer

　　5. The float valve is made of metal material, with high relative density on the surface and excellent corrosion and rust resistance.THwCooling tower noise reduction treatment manufacturer

　　The above is the reason and solution for the closed cooling tower that trlon air conditioner has summarized for you. For more cooling tower problems, please visit trlon air conditioning website or call for consultation.THwCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/346.html