Solutions to common problems and failures of enclosed cooling towers

　　As a large-scale equipment, a closed cooling tower will have problems for a long time. The editor of trlon air conditioner will sort out some of its faults and solutions for everyone. Let’s look down.M9tCooling tower noise reduction treatment manufacturer

　　Packing problem:

　　The common problems of packing are scaling and aging. The enclosed cooling tower adopts suspended packing, and it is enough to manually wash the scale with high-pressure water to solve the difficult problem of countercurrent tower packing. If the original packing is used, the service life will be more than 10 years, and there will be no aging in the short term. The packing must be replaced. For packing with excessive scale or sludge, consider cleaning.M9tCooling tower noise reduction treatment manufacturer

　　Motor problem:

　　The problem of the motor is simple. It is nothing more than heat, burnout, vibration, etc. This is related to the quality of the motor, and the vibration may be related to the wear of the bearing. Enclosed cooling tower motors are generally specially customized outdoor motors, which greatly reduce the damage rate of the motor in high temperature, high humidity, and high-intensity environments. Specific problems are analyzed in detail, and most of them can be solved by repair or replacement.M9tCooling tower noise reduction treatment manufacturer

　　Fan problem:

　　If the air volume is insufficient, the angle of the fan blades and the belt can be adjusted appropriately. But if the fan blade is broken, there is no other way but to replace it. And one blade is broken, all the blades need to be replaced. Of course, there are many problems with fans, such as the blades and the air ducts, and the vibration of the blades. This requires on-site testing and analysis.M9tCooling tower noise reduction treatment manufacturer

　　The above are the common faults of closed cooling towers organized by trlon air-conditioning editor. Guangdong trlon energy-saving air-conditioning equipment Co., Ltd. has a group of professional scientific research and development, manufacturing teams, R&D and design department, manufacturing department, quality inspection department, and sales department. , After-sales service and other departments are led by employees with many years of experience in water cooling equipment. A cooling tower R&D center and thermal performance test platform are set up to ensure that the performance of the cooling tower meets the requirements of the working conditions.M9tCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/344.html