How to install the water tank for the supporting equipment of the closed cooling tower reasonably?

　　Regardless of the water storage tanks of closed cooling towers, they are all installed according to the requirements of the standard. For example, when the cooling equipment is made in a one-story engineering building, the closed cooling tower can also be installed outdoors according to the overall plan design regulations. On the ground or on the roof. Below the closed cooling tower is a water storage machine and equipment, and a special replenishment port is developed to connect the water pipe or other flow channels to the cooling tower through the water supply port. The machinery and equipment are disturbed by temperature. When the temperature is less than the freezing point, it is not suitable for use.QAhCooling tower noise reduction treatment manufacturer

　　When the cooling water flow is relatively large, in order to better facilitate the replenishment of equipment and equipment, and in the case of low temperature, the closed cooling tower storage tank can also be designed indoors or at a higher temperature for remote supplementation water. When a closed cooling tower is installed in a high-rise building, an independent cooling cycle system can also be formulated at the beginning of the formulation, or a general cooling storage tank, return pipe and water supply equipment can also be formulated.QAhCooling tower noise reduction treatment manufacturer

　　For closed cooling towers, the specific function of the water storage tank is to increase the water flow of the circulating water system, so that the cooling circulating water pump can operate smoothly and ensure that the water pump does not run idly. When using a closed cooling tower intermittently, in order to better reduce the surface lubricity of the cooling tower filler and maintain the normal operation of the water layer, the cooling water can flow back to the storage tank of the high tower chassis to complete the stable balance of water.QAhCooling tower noise reduction treatment manufacturer

　　When the closed cooling tower is stopped for a while and used again, the cooling water will not return to the storage tank in a short time. It is more likely that if the cooling water in the water storage tank is not enough, the water pump will be empty if there is little water. The cooling water under the cooling tower can also ensure sufficient water flow.QAhCooling tower noise reduction treatment manufacturer

　　Generally, the float valve is made in a closed cooling tower storage tank. When the water supply is not enough, when the float valve is below the supply line, the machinery and equipment will automatically rehydrate. In these cases, the water level should be the minimum water level of the machinery and equipment. In order to better ensure a better water flow, the minimum water level line will be installed above the minimum position.QAhCooling tower noise reduction treatment manufacturer

　　Trlon relies on professional cooling equipment R&D and production technology experience, combined with domestic and foreign leading management models, forming a first-class R&D team. The company specifically manufactures process water cooling and gas condensing machinery and equipment such as closed cooling towers, evaporative condensers, and open cooling towers. At the same time, it can also customize corporate products that best meet customer requirements according to the different needs of customers. Relying on high-quality corporate products and perfect after-sales service, it has been well received by customers. The company adheres to the brand concept of "professional quality, industry pioneer", keeps brand building and after-sales service close to the market, takes science and technology as the guide, survives on quality, manages internally and expands the market externally, and strives to reach a higher level.QAhCooling tower noise reduction treatment manufacturer

Article Address：https://www.trlen.com/baike/264.html